Fusion SiO2 Primer Polish
A Nano Swirl Remover – and so much more!
Fusion SiO2 Primer Polish is a polish with dual functionality. This unique formula acts as a nano swirl remover that clears up light haze with ease to produce a deep, high gloss. The polish works by building a layer of SiO2 resins on the surface which acts as a primer before the application of an SiO2 based ceramic coating or sealant.
Fusion SiO2 Primer Polish is a polish with dual functionality. This unique formula will clear up light haze with ease producing a deep, high gloss. The polish works by building a layer of SiO2 resins on the surface which acts as a primer prior to application of a ceramic coating.
The SiO2 cross-links between your top coat and ceramic coating to provide a stronger bond with the surface. The effortless wipe off and dust free results make for a stress-free final polish. Its non-filling and silicone free blend gives you a TRULY perfect finish every time.
At Marine Nano Shop, we always put your satisfaction first. Come to us with any questions, comments or concerns you have about our products, and our support staff will be happy to make sure you get the most from your purchase.
Fusion is part of a comprehensive portfolio of marine-grade restoration products. For best compounding results, we recommend starting with Revive or Reboot for any heavier correction first for a maximum gloss.
We recommend using Fusion with the following products:
- a foam or microfiber polishing pad or 100% yellow wool polishing pad
- A great follow-up to Revive or Reboot
|
Perfect for: |
Details: |
|
Light correction of fine scratches and hazing |
Creates a brilliant gloss and shine for boats, yachts, etc. |
|
Light swirl removal in gel coat and marine paint |
Removes dry sanding scratches of 1500 grit |
|
Increases adhesion properties of SiO2 coatings and sealants |
Does not contain waxes, fillers or silicone |
|
Maximizing clarity and depth of paint |
Marine-grade polishing with effortless, dust-free wipe off |
Apply four dime size dots of product to a foam polishing or finishing pad. Work a 2x2 sq. ft section at a time using overlapping passes until desired results are achieved. Remove product with a soft microfiber towel.
*always wipe down with our Prep Wipe prior to applying Liquid Crystal Armour ceramic coating.
Application: Hand, DA polisher
Ignite Nano Polish
Reboot Medium Cut Nano Compound
